Product Description

High Quality Rubber Shaft Tyre flexible Coupling For Mechanical Equipment
 

Features

Material: cast iron GG25, GG20  steel: C45
Parts: 2 couplings and 1 tire body.
Size from F40-F250. and Type: “B”, “F”, “H”.
Working temp: -20~80ºC
Transmission torque:10-20000N.M
Axial misalignment: D*2%
Radial deviation: D*1%
Angular misalignment:3°-6°
Application: tire couplings are usually used in wet, dusty, under attract, vibration, rotating, and complex working conditions. like:  diesel pump
Installation: easy on, easy off.
Maintenance: no need for lubricating and durability.
 

Product Description

Size Type Bush No. MaxBore Type F&H Type H Serve over
Key
A C D F M
mm Inch L E L E
F40 B 32 33 22 M5 104 82 11
F40 F 1008 25 1″ 33 22 104 82 11
F40 H 1008 25 1″ 33 22 104 82 11
F50 B 38 43 32 M5 133 100 79 12.5
F50 F 1210 32 1 1/4″ 38 25 133 100 79 12.5
F50 H 1210 32 1 1/4″ 38 25 133 100 79 12.5
F80 B 45 55 33 M6 165 125 70 16.5
F80 F 1610 42 1 5/8″ 42 25 165 125 103 16.5
F60 H 1610 42 1 5/8″ 42 25 165 125 103 16.6
F70 B 50 47 35 M8 187 142 80 60 11.5
F70 F 2012 50 2″ 44 32 187 142 80 50 11.5
F70 H 1810 42 1 5/8″ 42 25 187 142 80 50 11.5
F80 B 60 55 42 M8 211 165 98 54 12.5
F80 F 2517 80 2 1/2″ 58 45 211 165 98 54 12.5
F80 H 2012 50 2″ 45 32 211 165 98 54 12.5
F90 H 70 63.5 49 M10 235 188 108 62 13.5
F90 F 2517 60 2 1/2″ 58.5 45 235 188 108 62 13.5
F90 H 2517 60 2 1/2″ 58.5 45 235 188 108 62 13.5
F100 H 80 63.5 49 M10 235 188 120 62 13.5
F100 F 3571 75 3″ 64.5 51 235 188 125 62 13.5
F100 H 2517 60 2 1/2″ 58.5 45 235 188 113 62 13.5
F110 B 90 75.5 63 M12 279 233 128 62 12.5
F110 F 3571 75 3″ 63.5 51 279 233 134 62 12.5
F110 H 3571 75 3″ 63.5 51 279 233 134 62 12.5
F120 B 100 84.5 70 M12 314 264 140 67 14.5
F120 F 3525 100 4″ 79.5 65 314 264 144 67 14.5
F120 H 3571 75 4″ 85.5 51 314 264 144 67 14.5
F140 B 130 110.5 4 M16 359 311 178 73 16
F140 F 3525 100 4″ 81.5 65 359 311 178 73 16
F140 H 3525 100 4″ 81.5 65 359 311 178 73 18
F160 B 140 117 102 M20 402 345 187 78 16
F160 F 4030 115 4 1/2″ 92 77 402 345 197 78 16
F160 H 4030 115 4 1/2″ 92 77 402 345 197 78 16
F180 B 150 137 114 M16 470 394 205 94 23
F180 F 4536 125 5″ 112 89 470 394 205 94 23
F180 H 4535 125 5″ 112 89 470 394 205 94 23
F200 B 150 138 114 M20 508 429 205 103 24
F200 F 4535 125 5″ 113 89 508 429 205 103 24
F200 H 4535 125 5″ 113 89   508 429 205 103 24
F220 B 160 154.5 127 M20 562 474 223 118 27.5
F220 F 5571 125 5″ 129.5 102 562 474 223 118 27.5
F220 H 5571 125 5″ 129.5 102 562 474 223 118 27.5
F250 H 190   161.5 132 M20 628 522 254 125 29.5

 

Related Products

 

 

Company Profile

 

FAQ

Q: How do you ship to us?
A: It is available by air, sea, or train.

Q: How do I pay the money?
A: T/T and L/C are preferred, with different currencies, including USD, EUR, RMB, etc.

Q: How can I know if the product is suitable for me?
A: >1ST confirm drawing and specification >2nd test sample >3rd start mass production.

Q: Can I come to your company to visit?
A: Yes, you are welcome to visit us at any time.
 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

mechanical coupling

Exploring the various materials used in manufacturing mechanical couplings.

Mechanical couplings are manufactured using a wide range of materials, each chosen based on specific application requirements. The choice of material impacts the coupling’s performance, durability, and suitability for different operating conditions. Here are some common materials used in manufacturing mechanical couplings:

1. Steel:

Steel is one of the most widely used materials for mechanical couplings due to its strength, durability, and cost-effectiveness. It is suitable for various applications, including high-torque and high-speed requirements. Stainless steel is often preferred for couplings in corrosive environments.

2. Aluminum:

Aluminum is known for its lightweight properties, making it suitable for applications where reducing weight is essential, such as in aerospace and automotive industries. However, aluminum couplings may have lower torque capacities compared to steel couplings.

3. Cast Iron:

Cast iron is used in couplings requiring high strength and wear resistance. It is commonly used in industrial machinery and heavy-duty applications.

4. Bronze:

Bronze is chosen for its excellent resistance to corrosion and its ability to handle high shock loads. Bronze couplings are often used in marine and hydraulics applications.

5. Brass:

Brass is used in couplings where electrical conductivity is required, such as in some electrical motor couplings.

6. Rubber and Elastomers:

Rubber and elastomers are used in flexible couplings to provide flexibility and vibration damping. They can absorb shocks and compensate for misalignments in various applications.

7. Polyurethane:

Polyurethane is commonly used in elastomeric couplings due to its excellent resilience, toughness, and resistance to wear.

8. Thermoplastics:

Thermoplastics like nylon and polyethylene are used in lightweight couplings with low torque requirements. They are known for their low friction and self-lubricating properties.

9. Composite Materials:

Composite materials, such as carbon fiber-reinforced polymers, are used in high-performance couplings where a balance of strength and weight is crucial.

10. Ceramic:

Ceramic couplings are used in extreme temperature and high-speed applications due to their excellent thermal and wear resistance properties.

The choice of material for a mechanical coupling depends on factors like the application’s operating conditions, load requirements, environmental factors, and cost considerations. Selecting the right material ensures that the coupling can perform reliably and efficiently in its intended application.

“`mechanical coupling

Are there any safety considerations when working with mechanical couplings?

Yes, working with mechanical couplings involves some safety considerations to prevent accidents and ensure the well-being of personnel. Here are important safety measures to keep in mind:

1. Lockout/Tagout Procedures:

Prior to working on machinery with mechanical couplings, implement lockout/tagout procedures to ensure that the equipment is isolated from its power source and cannot be accidentally energized during maintenance or repair activities.

2. Proper Training:

Ensure that personnel working with mechanical couplings receive proper training on safe handling, installation, and maintenance procedures. Adequate knowledge of coupling types, torque limits, and alignment techniques is crucial to avoid accidents.

3. Personal Protective Equipment (PPE):

Wear appropriate personal protective equipment, such as gloves, safety goggles, and hearing protection, when installing or inspecting couplings. This helps prevent injuries from sharp edges, rotating parts, or potential flying debris.

4. Follow Manufacturer’s Guidelines:

Always follow the manufacturer’s guidelines and instructions for the specific coupling being used. Proper installation torque, maintenance schedules, and safety precautions provided by the manufacturer should be strictly adhered to.

5. Inspections:

Regularly inspect the couplings for signs of wear, misalignment, or damage. Any worn or damaged couplings should be replaced promptly to prevent failures during operation.

6. Avoid Overloading:

Do not exceed the torque and speed limits specified by the manufacturer for the coupling. Overloading the coupling can lead to premature failure and potential safety hazards.

7. Preventive Maintenance:

Implement a preventive maintenance program to regularly check and service the couplings as recommended by the manufacturer. Proper maintenance can extend the life of the coupling and prevent unexpected failures.

8. Proper Storage:

Store spare couplings in a safe and dry environment, away from potential damage or exposure to harmful substances. Protect the couplings from corrosion and contamination.

9. Emergency Procedures:

Have emergency procedures in place in case of coupling failure or accidents. Employees should know how to respond to unexpected incidents safely.

10. Proper Lifting and Handling:

When installing or removing heavy couplings, use appropriate lifting equipment and techniques to prevent strain or injuries.

By following these safety considerations, workers can reduce the risk of accidents and ensure a safe working environment when dealing with mechanical couplings.

“`mechanical coupling

Can a faulty mechanical coupling lead to equipment failure and downtime?

Yes, a faulty mechanical coupling can indeed lead to equipment failure and downtime in a mechanical system. The importance of well-maintained and properly functioning couplings cannot be overstated, and their failure can have significant consequences:

1. Loss of Torque Transmission:

A faulty coupling may not be able to effectively transmit torque from the motor to the driven load. This loss of torque transmission can result in reduced or erratic performance of the equipment.

2. Increased Wear and Damage:

When a coupling is not functioning correctly, it may introduce excessive play or misalignment between the connected components. This can lead to increased wear on bearings, shafts, gears, and other parts, accelerating their deterioration.

3. Vibrations and Resonance:

Faulty couplings can cause vibrations and resonance in the system, leading to stress and fatigue in the equipment. These vibrations can further propagate throughout the machinery, affecting nearby components and leading to potential failures.

4. Overloading and Overheating:

In some cases, a faulty coupling may not slip or disengage as intended when subjected to overload conditions. This can cause excessive stress on the equipment, leading to overheating and potential damage to the motor, gearbox, or other components.

5. System Downtime:

When a mechanical coupling fails, it often necessitates equipment shutdown for repairs or replacement. This unplanned downtime can lead to production halts, reduced efficiency, and financial losses for businesses.

6. Safety Risks:

A faulty coupling that fails to disconnect or slip during overloads can pose safety risks to personnel and equipment. It may lead to unexpected and potentially dangerous equipment behavior.

7. Costly Repairs and Replacements:

Fixing or replacing damaged components due to coupling failure can be costly. Additionally, if a faulty coupling causes damage to other parts of the system, the repair expenses can escalate.

Regular maintenance and inspections of mechanical couplings are crucial to detect early signs of wear or damage. Identifying and addressing issues promptly can help prevent equipment failure, reduce downtime, and ensure the smooth and efficient operation of mechanical systems.

“`
China Professional High Quality Rubber Shaft Tyre Flexible Coupling for Mechanical Equipment  China Professional High Quality Rubber Shaft Tyre Flexible Coupling for Mechanical Equipment
editor by CX 2024-02-04