Product Description

Jaw Type Mechanical Couplings for Motors 

Mighty can produce full series of NM couplings: NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265, NM295, NM330, NM370, NM415, NM480, NM575.

Material: cast iron GG25; Bore type: pilot bore, finished bore for set screw, bearing, keyway, taper bush; Surface finish: phosphate coated. 

Use:

Mainly used in the mining, metallurgical, cement, chemicals,construction, buiding materials,

electric power, telecommunictions, textiles, and transportation departments.

Such as:

1. conveyor:Belt conveyor,AFC conveyor, chain conveyor, screw conveyor.

2. Pum:Water pump, oil pump, slush pump, etc.

3.Fan: Draft fan, fanner, boil fan, etc.

4. Excator:bucket excavator bucket, wheel excavators .

5. Crane:Tower crane, gantry crande, bridge crane.

6.Others:Various elevators, coal plough, ball mill, crusher, recreation machine.

7.Blender equipment, centrifuger, washer, leather-making machine, machine for recreation 

   park mixer wire drawing machine.Extruder, dregs crusher of boiler.

8.Plastic feeder, rubber smelling machine, etc.

OUR SERVICE:

1) Competitive price and good quality

2) Used for transmission systems.

3) Excellent performance, long using life

4) Could be  developed according to your drawings or data sheet

5) Pakaging:follow the customers’ requirements or as our usual package

6) Brand name: per every customer’s requirement.

7) Flexible minimum order quantity

8) Sample can be supplied

MAIN PRODUCTS:

1) Timing Belt Pulley (Synchronous Pulley), Timing Bar, Clamping Plate;

2) Forging, Casting, Stampling Part;

3) V Belt Pulley and Taper Lock Bush; Sprocket, Idler and Plate Wheel;Spur Gear, Bevel Gear, Rack; 

4) Shaft Locking Device: could be alternative for Ringfeder, Sati, Chiaravalli, Tollok, etc.;

5) Shaft Coupling:including Miniature couplings, Curved tooth coupling, Chain coupling, HRC coupling,              Normex coupling, Type coupling, GE Coupling, torque limiter, Universal Joint; 

6) Shaft Collars: including Setscrew Type, Single Split and Double Splits;

Company Information
ZheJiang Mighty Machinery Co., Ltd. specializes in manufacturing Mechanical Power Transmission Products.
We Mighty is the division/branch of SCMC Group, which is a wholly state-owned company, established in 1980.
About Mighty:

-3 manufacturing factories, we have 5 technical staff, our FTY have strong capacity for design and process design, and more than
70 workers and double shift eveyday.
-Large quality of various material purchase and stock in warhouse which ensure the low cost for the material and production in
time.
-Strick quality control are apply in the whole prodution. we have incoming inspection,process inspection and final production
inspection which can ensure the perfect of the goods quality.
-14 years of machining experience. Long time cooperate with the Global Buyer, make us easy to understand the csutomer and handle the export.
MIGHTY’s products are mainly exported to Europe, America and the Middle East market. With the top-ranking management, professional technical support and abundant export experience, MIGHTY has established lasting and stable business partnership with many world famous companies and has got good reputation from CHINAMFG customers in international sales.

FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment=10000USD, 30% T/T in advance ,balance before shippment

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

mechanical coupling

How to identify the most suitable mechanical coupling for a specific application?

Choosing the right mechanical coupling for a specific application requires careful consideration of various factors. Here are the steps to help identify the most suitable coupling:

1. Understand Application Requirements:

Begin by thoroughly understanding the requirements of the application. Consider factors such as torque and speed requirements, misalignment allowances, space constraints, environmental conditions, and any specific industry standards.

2. Evaluate Shaft Misalignment:

Determine the type and amount of misalignment expected between the connected shafts. If significant misalignment is anticipated, flexible couplings may be more appropriate.

3. Consider Torque and Power Transmission:

Calculate the torque and power that the coupling will need to transmit between the shafts. Ensure that the selected coupling can handle the expected load without exceeding its rated capacity.

4. Assess Operating Speed:

Take into account the operating speed of the system. High-speed applications may require couplings designed for high rotational speeds to avoid issues like resonance.

5. Evaluate Environmental Factors:

Consider the environmental conditions in which the coupling will operate. For example, corrosive or harsh environments may require couplings made from specific materials like stainless steel.

6. Review Space Limitations:

Examine the available space for installing the coupling. In some cases, compact couplings may be necessary to fit within confined spaces.

7. Analyze Misalignment Compensation:

For applications where precise alignment is challenging, choose couplings that offer misalignment compensation, such as flexible couplings or universal couplings (Hooke’s joints).

8. Consider Vibration Damping:

If the application involves vibrations or shock loads, consider couplings with vibration damping properties, like certain types of flexible couplings.

9. Account for Maintenance Requirements:

Factor in the maintenance needs of the coupling. Some couplings may require periodic inspections and replacement of components, while others are relatively maintenance-free.

10. Seek Expert Advice:

If unsure about the most suitable coupling for the application, consult with coupling manufacturers or engineering experts who can provide guidance based on their expertise and experience.

By systematically evaluating these factors and requirements, engineers and designers can narrow down the options and select the most appropriate mechanical coupling that will ensure reliable and efficient operation in the specific application.

“`mechanical coupling

Do mechanical couplings require regular maintenance, and if so, how often?

Yes, mechanical couplings do require regular maintenance to ensure their optimal performance and longevity. The frequency of maintenance depends on various factors, including the type of coupling, the application’s operating conditions, and the manufacturer’s recommendations. Here are some general guidelines for the maintenance of mechanical couplings:

1. Visual Inspection:

Perform regular visual inspections of the coupling to check for signs of wear, damage, or misalignment. Inspect for any corrosion, cracks, or wear on the coupling components.

2. Lubrication:

Some mechanical couplings, especially those with moving parts or sliding surfaces, require periodic lubrication. Follow the manufacturer’s recommendations regarding the type and frequency of lubrication.

3. Torque Verification:

Check the tightness of fasteners, such as set screws or bolts, to ensure that the coupling is securely attached to the shafts. Loose fasteners can lead to misalignment and reduced performance.

4. Alignment Check:

Regularly check the alignment of the connected shafts to ensure that the coupling is operating within its design limits. Misalignment can lead to premature wear and reduced coupling efficiency.

5. Replacement of Worn Components:

If any coupling components show signs of wear or damage beyond acceptable limits, replace them promptly to prevent further issues.

6. Operating Condition Analysis:

Monitor the operating conditions of the mechanical system and assess whether any changes have occurred that may affect the coupling’s performance. Environmental conditions, load variations, and other factors can impact the coupling’s wear rate.

7. Manufacturer’s Guidelines:

Always follow the maintenance recommendations provided by the coupling manufacturer. The manufacturer’s guidelines may include specific inspection intervals and maintenance procedures tailored to the coupling type and application.

The maintenance frequency for mechanical couplings can vary from monthly inspections for high-demand applications to annual inspections for less demanding conditions. In some cases, couplings in critical systems may require more frequent inspections to ensure their reliability.

Implementing a proactive maintenance program for mechanical couplings helps identify potential issues early and prevents unexpected failures that can lead to costly downtime and repairs. Regular maintenance extends the life of the coupling, improves system efficiency, and enhances overall operational safety.

“`mechanical coupling

Advantages of using mechanical couplings in power transmission systems.

Mechanical couplings offer several advantages when used in power transmission systems, making them a preferred choice in various industrial applications. Some of the key advantages include:

  • Torque Transmission: Mechanical couplings efficiently transmit torque from one shaft to another, enabling the transfer of power between different components of the system.
  • Misalignment Compensation: Many mechanical couplings can accommodate axial, radial, and angular misalignments between connected shafts, ensuring smooth operation even when precise alignment is challenging to achieve or maintain.
  • Vibration Damping: Some types of mechanical couplings, particularly flexible couplings, dampen vibrations caused by imbalances or load fluctuations. This feature reduces wear on components and improves overall system stability.
  • Shock Absorption: Certain flexible couplings have the ability to absorb shocks and impacts, protecting the connected equipment from sudden force variations and preventing damage.
  • Easy Installation: Mechanical couplings are generally easy to install and replace. Their modular design simplifies maintenance and reduces downtime in case of coupling failure.
  • Load Distribution: Mechanical couplings evenly distribute the load between connected shafts, preventing premature wear and reducing the chances of component failure.
  • Compact Design: Mechanical couplings come in various compact designs, allowing for efficient power transmission without adding significant bulk to the system.
  • Customizability: Manufacturers offer a wide range of mechanical couplings with different sizes, materials, and features to meet specific application requirements, giving engineers the flexibility to choose the most suitable coupling for their systems.
  • Cost-Effectiveness: Mechanical couplings are generally cost-effective compared to more complex power transmission methods, making them a practical choice for many industrial applications.
  • Safety: Some mechanical couplings, like shear-pin or torque-limiting couplings, act as safety features, disconnecting or slipping when the system experiences overload, preventing damage to expensive components.

These advantages make mechanical couplings indispensable in power transmission systems across various industries, including manufacturing, automotive, aerospace, marine, and more. Their ability to efficiently transmit power, accommodate misalignments, and protect the equipment ensures reliable and smooth operation of mechanical systems, contributing to overall system performance and longevity.

“`
China wholesaler Jaw Type Mechanical Couplings for Motors  China wholesaler Jaw Type Mechanical Couplings for Motors
editor by CX 2024-05-15