Electric  China  in   Bogra Bangladesh   half gear coupling  manufacturer  Remote  in   Indore India   bowex coupling sales  Control Stainless Steel Fire Fighting Monitor for Truck  with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Description:

This monitor is made of stainless steel which is widely used on water truck fire truck, boat, chemical factory, airport, tower, wharf etc. The key parts are selected. The motors are imported from USA and ZheJiang . The sensors are imported from Germany. Each Monitor is well tested before delivery. All the monitors are CCC certified. 

Features:
1. Good Material: Stainless steel monitor body and aluminum hard anodized nozzle.
2. Adjustable Nozzle: The flow rate is adjustable among 20-30-40L/S.
3. Selected key parts: Motors are imported from USA and ZheJiang . Sensors are imported from Germany.
4. Remote Control is available.
5. Water way is 2.5” which is big enough for the max flow 40L/S. 
6. Stream Sharper is available to make sure good performance.
7. Control box works on off road.
8. The warranty is 2 years. 

Specification:
 

Weight in Kg Incl. Nozzle Approx. 24KG   Range of Motion +90°/-55°vertical , 360°Horizontal
Other Degrees Adjustable

Material

Body Stainless 304(standard) Stainless 316 (optional) Speed
(of high speed version)
24°/sec rotation , 10°/ sec vertical
Aluminum Hard Anodized Nozzle Power Consumption Max. 24V @ 7.5A
Gear bronze Power Supply 24 VDC

Flow Range @ 7 bar
(Max recommended)

Nozzle Model: AN40 – 24Vdc Jet Spray
Nozzle – Adjustable
Reaction Force Up to 900N
Mechanical Installation Support must withstand 4000 N of force
flow rates of:1200LPM-1800LPM-2400LPM@100PSI Options Network, radio remote , aux control etc.
Max. Reach @ 7 bar 60M

Type : PSKD30-ST 
Flow Range: 20-30-40L/S (320GPM-630GPM), Adjustable
Working Pressure: 6 bar~ 8 bar
Max Reach @ Max Flow: 60M (148-180ft)
Max. Range of motion:  +/-90°Vert , 350°Rot 
Max fog angle :120°
Turning speed:18 degrees/sec
Material (body):304L Stainless Steel, 316L Stainless Steel is also available
Material (Gear):hardcoated anodizing aluminum
Material (nozzle):Alumimun
power supply:12/24VDC or 100-230VAC
Power Consumption normal/Max:50W/150W
Weight incl. nozzle:appox 20kg
Cable Length Monitor- CPU:5m 
Cable Length Joystick-CPU:5m standard/ other length available
Pump requirement for minimum performance:40L/S@ 6 bar
Pipe dimensions for installation: 2-2.5 Inch
Monitor Inlet:2.5″ male BSP or DN65 flange
Monitor Outlet:2.5 inch (50mm)
Water way size: 2-1/2 inch
PACKAGE: SS MONITOR, NOZZLE, CONTROL BOX, JOYSTICK, CABLES, WIRELESS CONTROL (OPTIONAL

System Components Description:
 

NAME FIRE MONITOR BODY 24Vdc EPT JET SPRAY NOZZLE JOYSTICK

PART IMAGE

     
PART# PSKD30CB AN40 CTRL – J01

BRIEF DES- CRIPTION

24Vdc EPT Remote Controlled Selectable Flow Rates Of Up-down-left-right,straight stream/fog function
2 ½ “NH outlet 1200 LPM 1800LPM 2400LPM @ 100PSI Power indicator
Stainless steel 2 ½” waterway IP67 standard seal actuator Aluminum base
Bronze worm , stainless steel gear Fixed fog teeth  
2 ½” ANSI 150# Inlet flange  
 
NAME CONTROL UNIT Straight Bore Branch Pipe Nozzle OPTIONAL CABLES

PART IMAGE

 

 

 
PART# CU-01 SN-32 CTRL-CB01 / CTRL-CB02

BRIEF DES- CRIPTION

Aluminum cover Hard Anodized Stacked Tip Branch Pipe Nozzle c/w Inbuilt Stream Shaper – 32mm End Nozzle Orifice Tip Joystick to Control Unit cable- 5m length
IP67 Standard sealed Monitor to Control Unit cable- 12m length
  2 ½” NH Female Inlet Other length cables please specify

More Photos:

Machining,  Warehouse and Testing Building:

Fire fighting Exhibition in ZheJiang

Our Company

Since the company was founded in 1996, SXFIREPRO has evolved and grown from a small factory in the yard with the limited capacity to only make couplings, to a sophisticated and leading factory, that now spans over 35000 square meters and employs over 60 skilled engineers, craftsmen, and mechanics – a figure that continues to grow. As one of the  family-owned fire equipment manufacturers in China, SXFIREPRO continues to instill the tradition of product excellence, acute customer care, and superior service.

Over the past few years, SXFIREPRO has pushed and expanded its product line to fire monitors, fire nozzles, bladder foam tanks,foam concentrate,fire robots, etc., Unlike most fire equipment manufacturers, sxfirepro also delivers on the meaning of custom-crafted appatatus. Working side-by-side with each customer, sxfirepro will construct your vehicle based on your specific department’s needs, The Sheng EPT team – from the best engineers and draftsmen to highly skilled mechanics and craftsmen will always give you a surprise on the quality. An sxfirepro product is as unique as our customers.

 

FAQ

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free if the cost is below USD20 with freight on your cost.

Q: How long is your delivery time?
A: Generally it is 5 days if the goods are in stock. Or it is 15 days if the goods are not in stock, it is according to quantity.

Q. what is your payment term? 
A: T/T 30% payment in advance, balance to be paid prior  shipment.

Q: what is your main market?
A: ,Western Europe,North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia. 

Q: Can I have my own EPT product?
A: Yes, we can supply logo Print and package desiged based in our MOQ.

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Electric  China  in   Bogra Bangladesh   half gear coupling  manufacturer  Remote  in   Indore India   bowex coupling sales  Control Stainless Steel Fire Fighting Monitor for Truck  with top quality lowest price