Product Description
SWC-WF No Flexible Short Mechanical Universal Cardan Shaft, Universal Joint, Universal coupling
Description:
The SWC-WF non flexible flange type universal joint is a Universal joint with 2 bent joints. This enables it to work at an angle of up to 90 degrees. It is a non flexible flange type, which means there is no flexible coupling between 2 bent joints. This makes it harder and more suitable for applications with significant vibrations or impacts.
The SWC-WF non flexible flange type universal joint is the most commonly used universal joint, and its structural feature is that it cannot reliably transmit torque and motion at the same axis or axis angle or 2 large equiangular continuous rotational speeds with large axial motion. It can be widely used for torque transmission in heavy machinery industries such as metallurgy, lifting, transportation, mining, petroleum, shipbuilding, coal, rubber, papermaking machinery, etc. Overall, the SWC-WF non flexible flange universal coupling is a high-quality and reliable product that is very suitable for various applications. It is more expensive than other types of universal joints, but it provides many advantages, such as being able to work at angles below 90 degrees and being durable.
Advantages:
1. Flexibility: SWC-WF does not come with a flexible flange type universal coupling and can transmit power between 2 shafts with angles up to 90 degrees. This makes it very suitable for applications with high misalignment, such as in mobile machinery or agricultural equipment.
2. Durability: The SWC-WF non flexible flange universal coupling is made of high-quality materials and designed to withstand harsh environments. It is also equipped with a set of bearings to help reduce friction and vibration, thereby extending the service life of the coupling.
3. Easy to maintain: The SWC-WF non flexible flange universal coupling is easy to install and maintain. The bearings are easy to access and can be replaced if necessary.
4. Double joint design: The double joint design allows SWC-WF to transmit power between 2 shafts with angles up to 90 degrees without a flexible flange type universal coupling. This makes it very suitable for applications with high misalignment.
5. Cost effectiveness: The SWC-WF non flexible flange universal coupling is a cost-effective solution suitable for applications that require high flexibility and durability.
Overall, the SWC-WF non flexible flange type universal joint is a universal and reliable coupling that has many advantages compared to other types of universal joints. For applications that require high flexibility, durability, and ease of maintenance, it is a good choice.
Product parameters:
Packing & shipping:
1 Prevent from damage.
2. As customers’ requirements, in perfect condition.
3. Delivery : As per contract delivery on time
4. Shipping : As per client request. We can accept CIF, Door to Door etc. or client authorized agent we supply all the necessary assistant.
FAQ:
Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of couplings.
Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks in PDF or AI format.
Q 3:How long is your delivery time?
Generally, it is 20-30 days if the goods are not in stock. It is according to quantity.
Q 4: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.
Q 5: Do you have inspection procedures for coupling?
A:100% self-inspection before packing.
Q 6: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Exploring the various materials used in manufacturing mechanical couplings.
Mechanical couplings are manufactured using a wide range of materials, each chosen based on specific application requirements. The choice of material impacts the coupling’s performance, durability, and suitability for different operating conditions. Here are some common materials used in manufacturing mechanical couplings:
1. Steel:
Steel is one of the most widely used materials for mechanical couplings due to its strength, durability, and cost-effectiveness. It is suitable for various applications, including high-torque and high-speed requirements. Stainless steel is often preferred for couplings in corrosive environments.
2. Aluminum:
Aluminum is known for its lightweight properties, making it suitable for applications where reducing weight is essential, such as in aerospace and automotive industries. However, aluminum couplings may have lower torque capacities compared to steel couplings.
3. Cast Iron:
Cast iron is used in couplings requiring high strength and wear resistance. It is commonly used in industrial machinery and heavy-duty applications.
4. Bronze:
Bronze is chosen for its excellent resistance to corrosion and its ability to handle high shock loads. Bronze couplings are often used in marine and hydraulics applications.
5. Brass:
Brass is used in couplings where electrical conductivity is required, such as in some electrical motor couplings.
6. Rubber and Elastomers:
Rubber and elastomers are used in flexible couplings to provide flexibility and vibration damping. They can absorb shocks and compensate for misalignments in various applications.
7. Polyurethane:
Polyurethane is commonly used in elastomeric couplings due to its excellent resilience, toughness, and resistance to wear.
8. Thermoplastics:
Thermoplastics like nylon and polyethylene are used in lightweight couplings with low torque requirements. They are known for their low friction and self-lubricating properties.
9. Composite Materials:
Composite materials, such as carbon fiber-reinforced polymers, are used in high-performance couplings where a balance of strength and weight is crucial.
10. Ceramic:
Ceramic couplings are used in extreme temperature and high-speed applications due to their excellent thermal and wear resistance properties.
The choice of material for a mechanical coupling depends on factors like the application’s operating conditions, load requirements, environmental factors, and cost considerations. Selecting the right material ensures that the coupling can perform reliably and efficiently in its intended application.
“`
Can mechanical couplings handle reversing loads and shock loads effectively?
Yes, mechanical couplings are designed to handle reversing loads and shock loads effectively in various applications. Their ability to accommodate these dynamic loads is dependent on their design and material properties.
Reversing Loads:
Mechanical couplings can handle reversing loads, which are loads that change direction periodically. When the direction of the applied torque changes, the coupling must be able to smoothly transition from one direction to the other without any slippage or backlash. Many types of mechanical couplings, such as gear couplings and disc couplings, are well-suited for reversing loads due to their rigid and positive engagement designs. They can maintain a strong connection between shafts and provide reliable torque transmission even during frequent load reversals.
Shock Loads:
Shock loads are sudden, high-intensity loads that occur due to impacts, starts, or stops. Mechanical couplings are engineered to withstand shock loads and prevent damage to the connected equipment. Flexible couplings, like elastomeric couplings, are particularly effective at dampening shock loads. The elastomeric material absorbs and dissipates the energy generated by the impact, reducing the transmitted shock to the system. Some metal couplings, such as beam couplings and bellows couplings, also have good shock absorption capabilities due to their design and material properties.
It’s important to consider the specific application requirements when selecting a coupling for systems with reversing loads or shock loads. Different coupling types have varying capabilities in handling these dynamic loads. Properly choosing a coupling that matches the load conditions ensures the longevity and reliability of the mechanical system, preventing premature wear and failures.
“`
Advantages of using mechanical couplings in power transmission systems.
Mechanical couplings offer several advantages when used in power transmission systems, making them a preferred choice in various industrial applications. Some of the key advantages include:
- Torque Transmission: Mechanical couplings efficiently transmit torque from one shaft to another, enabling the transfer of power between different components of the system.
- Misalignment Compensation: Many mechanical couplings can accommodate axial, radial, and angular misalignments between connected shafts, ensuring smooth operation even when precise alignment is challenging to achieve or maintain.
- Vibration Damping: Some types of mechanical couplings, particularly flexible couplings, dampen vibrations caused by imbalances or load fluctuations. This feature reduces wear on components and improves overall system stability.
- Shock Absorption: Certain flexible couplings have the ability to absorb shocks and impacts, protecting the connected equipment from sudden force variations and preventing damage.
- Easy Installation: Mechanical couplings are generally easy to install and replace. Their modular design simplifies maintenance and reduces downtime in case of coupling failure.
- Load Distribution: Mechanical couplings evenly distribute the load between connected shafts, preventing premature wear and reducing the chances of component failure.
- Compact Design: Mechanical couplings come in various compact designs, allowing for efficient power transmission without adding significant bulk to the system.
- Customizability: Manufacturers offer a wide range of mechanical couplings with different sizes, materials, and features to meet specific application requirements, giving engineers the flexibility to choose the most suitable coupling for their systems.
- Cost-Effectiveness: Mechanical couplings are generally cost-effective compared to more complex power transmission methods, making them a practical choice for many industrial applications.
- Safety: Some mechanical couplings, like shear-pin or torque-limiting couplings, act as safety features, disconnecting or slipping when the system experiences overload, preventing damage to expensive components.
These advantages make mechanical couplings indispensable in power transmission systems across various industries, including manufacturing, automotive, aerospace, marine, and more. Their ability to efficiently transmit power, accommodate misalignments, and protect the equipment ensures reliable and smooth operation of mechanical systems, contributing to overall system performance and longevity.
“`
editor by CX 2024-05-15